| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Max.Head: | 180 |
| Max.Capacity: | >400 L/min |
| Driving Type: | Magnetic |
| Material: | Cast Iron |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Speed | 2900r/min |
| Max.Capacity | 132L/s 300L/s |
| Max.Head | 150m |
| Max.Speed | 3500r/min |
| Max.Working Temperature | 105ºC |
| Shaft Seal | Packing or mechanical seal |
| Packing or mechanical seal | -10ºC |
| Working Pressure | Generally it is 1 Mpa, while the parts of undertaking pressure of XA40/32H,XA 50/32H,XA 65/32H,XA 80/32H are fabricated with nodular cast iron or cast steel, it can increase to 1.6 Mpa. XAS pump is 2.5 Mpa. When needed to apply to the other pumps, please state in the order.1Mpa,XA40/32H,XA 50/32H,XA65/32H,XA 80/32H |
| Applicable Standard | DIN24255; BS EN733 |
QS/QSW type submersible motor pump is mainly comprised by three parts: pump, mechanical seal and motor. Pump is at the bottom part of motor pump, which adopt centrifugal impeller, motor is at the upper part of motor pump and is a single phase asynchronous motor or three phase motor. Mechanical seals between pump and motor, and it's kind of double end mechanical seal, "o" rings are applied in all static joins of the submersible pumo. Inner-installed protector prevents the pump from damages due to abnormal power, clog and overload etc.
Pumps should be installed in a covered area, protected against the weather.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}